Now I know your thought might be to sew the two layers with right sides together and then flip them over to create a nice seam at the top of the skirt. One of the layers ends up on the “wrong” side of the fabric….if you try sewing them with right sides together, the side seam shows up on top of the skirt. Next, you’re going to fold the top under about 1/4 inch, iron, and sew it in place. Then sew a casing line right on the outside of the skirt–sewing the two skirt layers together.I use the edge of my throat plate (the silver/metal plate under your presser foot) to guide me in a straight line.Begin sewing at the starting point and sew all the way around to the stopping point.For fun, I like to sew a top-stitch at the top of my waistband, about 1/8 inch in from the edge.In the photo below, the edge of the skirt is lined up with the plate, which puts the presser foot about 1 1/4 inches over from the edge.When you’re done, it looks like this: Now, insert the elastic the two skirt layers and into the opening hole.
is a loose, temporary stitch to hold the layers in place until the official waistband is sewn.
Whatever your fantasies, you will be able to find free live sex cams that match exactly what you are looking for!
Nude Live brings you free webcam sex like no other adult site online.
If you have a small side tag, place it in there, a few inches from the bottom (info about my woven labels HERE). Sometimes I do that as my first step–I serge the top and bottom of my fabric, prepping it for the waistband and hem–but in the tutorial we’ll do this later on.
Just didn’t want you to think you missed a step.) , do a zigzag stitch to keep the edges from fraying, or just leave the seam edges raw.